Featured Post
Operations and Projects Management Essay Example | Topics and Well Written Essays - 2000 words
Activities and Projects Management - Essay Example The nature of administration to a client is foremost in any assistance firm, and the B...
Tuesday, August 20, 2019
Personal Communication as Assessment
Personal Communication as Assessment Good communication is as stimulating as black coffee and just as hard to sleep after, Anne Morrow Lindbergh. When I read this quote I was so much fascinated by the great effect personal communication in classrooms. Although, the question is: How can I best use my direct personal communication with my students during teaching to afford a feed back about their achievement? How can I use assessments based on personal communication to tap information and understanding, as well as evaluating critical thinking and application skills? In fact, personal communication as assessment can be fulfilled through many forms such as instructional questions and answers, class discussions, oral exams, student journals, diaries, conferences and interviews, and learning logs. Instructional questions and answers: Throughout my explanations of different scientific topics in my classes, I watch the expressions on my students faces. Besides, the various questions that the students ask tell me whether they are learning the material or not. But on the other hand, I always pose questions that help me figure out how well are they really learning and, perhaps more significantly, what can I do to improve their learning? Afterwards, data on student learning are analyzed and consequently the results inform me how instruction should most effectively proceed. Therefore, throughout my lesson plan the suggested questions must be designed to serve the diverse objectives of the lesson carefully such as analysis, comparisons, classification, etc. The most serious mistakes are not being made as a result of wrong answers. The truly dangerous thing is asking the wrong question, Peter Drucker. Whereas, I as a teacher need to broaden my listening so that I dont listen only to correct answers that I want to hear but also push further to listen to reasoning behind the answer. Moreover, sometimes correct answers mask confusions therefore I have to probe students answers to pick up misconceptions. Instructional questions and answers have much strength such as providing me with an ongoing feedback about my students achievement, probe reasoning and deepen their understanding and serves to give me insights into how my students think. On the other hand, instructional questions and answers have some weakness as it is time consuming and also it needs an experienced teacher as unclear and prolonged questions can hinder students focus on a relatively narrow range of acceptable responses. Conferences and interviews: Despite of the fact that our subject area science is not a healthy media that enrich the use of this form of personal communication, sometimes I do ask my students to perform interviews. For example, I asked them to make an interview with the school doctor or any other doctors as an application on the digestive system. I together with my students plan the questions in advance where, I guide them to ask questions that help connect what we have studied to real life applications. For example, I didnt include in the list of questions what are the parts of the digestive system or what are the functions of each on the other hand, I direct them to questions such as what is the suggested menu for a diabetic, hepatic or pregnant woman? If we have an athletic person, what do you advice him to do regarding his meals and nutritional habits? Of course from the strengthens of conferences and interviews in classrooms is that it helps teachers to show friendship, trusts, and interest in students and also helps students to perform additional work and enjoy the class as it motivate both the teacher and the students. The main weakness of conferences and interviews is that it consumes great amount of time that is why I always perform these types of communication assessment during the activity classes. Another drawback in such way of assessment is that the teacher cant help being biased to the interview points that appeals more to her interest. Class discussions: As cited in chapter 8 in Stiggins (2008): class discussions have the simultaneous effect of promoting both student learning and their ability to use what they know. Throughout my experience, I discovered that for classroom discussions to be effective, the teacher must act like a maestro that guide and lead an orchestra. In other words, the teacher has first to illuminate the purpose of the discussion, lead the students speech, identify the roles and prepare them for the discussion with questions, which they have to share in their preparation, and assignments. Second, the teacher has to clarify for the students the criteria or the rubric with which she is going to evaluate the discussion as this will minimize as much as possible the weakness of classroom discussions as a form of personal communication which are the difficulty in grading, avoiding being biased to one way of the conversation and students competing with one another rather than cooperate on learning tasks, as emphasized b y Stiggins (2008) Be sure the students are aware of your focus in evaluating their contribution. Are you judging the content of students contribution or the form of their contribution? On the other hand from the main strengths of class discussions are: opening a way of testing and exploring new ideas, students acquire information and insight from diverse points of view, they recognize and investigate their assumptions and consequently these conversations provide practice with problems and concepts. A teacher who is attempting to teach, without inspiring the pupil with a desire to learn, is hammering on a cold iron, Horace Mann (1796) Oral examinations: Despite of the precious and valuable academic and social skills that are gained by the students in practicing oral examination, not all find oral exams as easy, as to write. Some find it harder to express themselves. I believe that it is the teachers role to train the students on this type of personal communication assessment because both the pressures and time factor can cloud the mind with stress, and it is only with practice that the mind will relax and be able to think clearly. I think this can be achieved by starting with easy questions that act as ice breaking and afterwards I as a teacher can smoothly go deeper into the subject. As cited in Stiggins (2008) Clearly, the major argument against this assessment format is the amount of time it takes to administer oral exams. However, within my classes I overcome this problem by informing my students since the beginning of the school year that I am going to start each lesson by choosing four to five students to be asked oral questio ns on the previous lesson and the graded mark represent one of the three quizzes that I have to do every month. As the time passes and through the relaxing learning atmosphere the students acquire the hidden strengths behind oral examinations such as, the practice in structuring answers and organizing the material and the understanding of it. Journals and logs: As cited in Stiggins (2008) written records accumulate over time, you can use them to help students reflect on their improvement as achievers- the heart of assessment FOR learning. In spite of the great importance of reflective journals and logs in education, I as a science teacher cannot make use of it as a helping tool in assessment as ca do the English teachers. Whereas, I do ask my students to reflect in a very different and unique way that are related to our subject area for example, I always ask them to write down their observations, conclusions and their suggestion in various scientific topics that we go through in the lab. Putting hands on activities and reflecting on these experiences, highlights the strengths of this type of communication assessment such as: summarizing ideas, experience and opinions besides, viewing the academic and personal growth by reading past entries. On the other hand I cant see any weak points in writing journals except that I feel jealous of the En glish teachers because they can make perfect usage of this assessment tool. Throughout my own experience one of the merits of the AUC course is that it gives me the opportunity to go into the habit of writing reflective journals. Ways in which a teacher can maintain quality control when using personal communication as assessment in the classroom Using personal communication in combination with other methods can deepen our perceptive of student learning. By exposing our students to assessments that depend on personal communication, we can set them up for dynamic and successful education. Together with other methods, assessment based on personal communication is a victim to avoidable sources of bias that can misrepresent results if we are not careful. To circumvent the challenges of personal communication and ensure validity and reliability of the assessment, the questions must be on the spot to cover the decided achievement targets, and choose appropriate measures of evaluating answers which are clear for both the teacher and the students. There are three problems that represent limiting factors against the usage of personal communication as assessment which are: first the problem of forgetting, second the problem of filters and third the challenge of sampling. As emphasized by Stiggins (2008) in chapter 8 (Personal Communication as Assessment), to defeat the first problem the first reason for caution is that we must remain mindful of the fallibility of the human mind as a recording device. I trust that the only way to overcome this problem is to keep a written record for each student that reflects his achievement in a register form. Regarding the second problem, I was really impressed by Stiggins (2008) as he said if we establis hed norms of student performance according to gender, ethnic heritage, cultural backgrounds, physical appearance, linguistic experience, our knowledge of the students prior achievement, or any of a variety of other forms of prejudice all potentially unrelated to actual achievement we allow bias to creep into assessment, resulting in unreliable scores. I think that the best way to avoid these bias problems is to set a rubric for every single detail that we are going to assess. As for the last point which is the challenge of sampling, to overcome it and ensure the reliability of personal assessments, we have to set the targets clear and create the warmth atmosphere of the classroom in which we ask clear sufficient number of questions that enhance the students the opportunity to express their thoughts and ideas in a fair way.
Monday, August 19, 2019
Character Names in Joseph Helers Catch-22 Essay -- Joseph Heler Catch
Character Names in Joseph Heler's Catch-22 Many characters in Joseph Helerââ¬â¢s Catch-22 do not have proper names. Like the Texan, the soldier in white, and the soldier who saw everything twice, Natelyââ¬â¢s whoreââ¬â¢s kid sister does not have a specific birth name. This namelesnes forces the reader to question her identity, her characteristics, and her role in the work in relation to other characters. As Natelyââ¬â¢s whoreââ¬â¢s kid sister, she is at least two degres of separation away from a real name, a true identity. The reader is forced to consider this character first in relation to Nately and then as the kid sister of a whore who also lacks a proper name. Every formulation of the kid sisterââ¬â¢s identity must be filtered through these other characters. This distance from authentic identity makes her more of an abstraction than a recognizable character. She is described as innocent, dependent, and pre-sexual. These qualities put her in direct contrast with the corupt, immoral, and hedonistic ch aracters that populate the pages of this novel. An examination of her name (or lack thereof), her behavior, and her interactions with and influence upon other characters in this novel show Natelyââ¬â¢s whoreââ¬â¢s kid sister to be an embodiment of human innocence and hopefu longing for a brighter future. Insight may be gained most easily by breaking her name down into its component partsââ¬âkid and sister. ââ¬Å"Kidâ⬠is a coloquialism for child. Her behavior is repeatedly described in terms that one would asociate with a child. She is easily appeased with a hug and some chocolate ice cream. Her dependency and ned for atention can be seen in the way she tags along wherever Nately and his whore go and in her eforts to imitate her elders. Repeating what her ... ... and the sense of joy he now feels for living. These feelings are inspired by the kid sister and the innocence and hopefulnes that she represents. In Catch-22, Heler presents the human spirit in conflict with a contradictory world. The institutions that form the basis of societyââ¬âgovernment, commerce, religionââ¬âfail to provide the support neded for the mental, physical, and spiritual health of the species. Natelyââ¬â¢s whoreââ¬â¢s kid sister can be sen as a personification of the wil to survive. In the kid sister, Heler presents an irepresible, eternal hope for the future of humankind. Despite the ravages of war, abuse, neglect, depravity, and unrestrained capitalism the human soul continues to search for inspiration, for the innocent kid sister, for a way to the imposible shores of Sweden. Works Cited: Heler, Joseph. Catch-22. 1955. New York: Simon & Schuster, 1996.
Sunday, August 18, 2019
Jane Eyre?s Self-Discovery :: essays research papers
The novel Jane Eyre, by Charlotte Bronte consists of continuous journey through Janeââ¬â¢s life towards her final happiness and freedom. Janeââ¬â¢s physical journeys contribute significantly to plot development and to the idea that the novel is a journey through Janeââ¬â¢s life. Each journey causes her to experience new emotions and an eventual change of some kind. These actual journeys help Jane on her four figurative journeys, as each one allows her to reflect and grow. Jane makes her journey from Gateshead to Lowood at the age of ten, finally freeing her from her restrictive life with her aunt, who hates her. Jane resented her harsh treatment by her aunt. Mrs. Reedââ¬â¢s attitude towards Jane highlights on of the main themes of the novel, the social class. Janeââ¬â¢s aunt sees Jane as inferior, who is less than a servant. Jane is glad to be leaving her cruel aunt and of having the chance of going to school. At Lowood she wins the friendship of everyone there, but her life is difficult because conditions are poor at the school. She has come to be respected by the teachers and students, largely due to the influence of her teacher, Miss Temple, who has taken a part as a mother, governess, and a companion. Jane has found in Miss temple what Mrs. Reed always denied her. Also at Lowood Jane confront another main theme of the novel, the natural violence, which is depicted by Bronte then typhus kills many of the students including Janeââ¬â¢s best friend, Helen Burns. This scene is especially important, because it makes Jane stronger, which is appropriate, as mentally strong people cope with violence in a more rational way. As Jane grows up and passes the age of eighteen, she advertises herself as a governess and is hired to a place called Thornfield. Although journeying into the completely unknown, Jane does not look back, only forward to her new life and her freedom at Thornfield. This particular journey marks a huge change in Janeââ¬â¢s life; itââ¬â¢s a fresh start for her. Another important journey Jane makes is from Gateshead back to Thornfield having visited her aunt Reed on her deathbed. By then Jane realizes that she loves Rochester. A key theme is raised here, Jane fierce desire to love and to be loved. She feels alone and isolated when she has no friends around her. This is a sharp contrast compared to other charactersââ¬â¢ search for money and social position.
Saturday, August 17, 2019
India Is My Country Essay
India is my country, my motherland. I love it and I am proud of it. India is a big country. In population it is second only to China. India has a rich and glorious past. Once it was the seat of learning. Students from all over the world used to come here to study. Indian culture spread abroad. Indian goods had a ready market in foreign countries. It was a time when India was a land of plenty. Times changed. India fell on evil days. Wave after wave of invaders came and plundered India. India became a slave country. ââ¬ËThe foreign rulers exploited her as much as they could. India became independent in 1947. The foreign rulers went away. Under the able leadership of Pt. Nehru the country marched towards progress. New industries were set up. Trade increased. There were difficulties in the beginning. Kashmir was overrun by the tribals. There were communal riots Millions of people were uprooted from their homes. India is the largest democracy of the world. We Indians enjoy freedom of speech, worship and press. All citizens have equal rights. India is rich in natural resources, yet her inhabitants are poor. The mineral wealth of the country is unexplored. Under the Union Government, new industries are being set up. Already Indian goods are being exported to other countries. New methods of agriculture are being used to increase food production. She has already become self-sufficient in food. In the field of science and literature, India has produced eminent people like Rabindra Nath Tagore, Sir C.V.Raman, Sir Jagdish Chandra Bose and Shri H.N.Bhabha. India is a peace loving country but she has to spend a huge amount on defence because there is danger from her neighbours, namely Pakistan and China. The present Government under the new Prime Minister is trying to befriend them. India is a land of villages with many languages but there is unity in diversity. Ours is a secular state and all religions flourish side by side. My country abounds in glorious historical buildings and scenes. There is not a tourist who does not visit the Taj Mahal ââ¬â the symbol of eternal love or Kashmir, the heaven on earth. My country is a land of temples, mosques and churches, great rivers and vast fertile plains of the Ganges and the highest mountain of the world. It is the land where civilization first blossomed in the world. Our fields are fed with perennial waters of the rivers.India is my first love and I would readily lay down my life for it if need be.
Resisitivity Through Copper Wire
Measuring the Resistivity of Copper Wire of Different Lengths In this report I will be writing about the experiment I will conduct on copper wire of different lengths. The dependent variable I will be measuring is the resistance of the Copper wire. To do this experiment, one needs to obtain measurements with a high degree of accuracy, taking care of the equipment they use and measuring each value to a certain degree of accuracy for all results. The problem with measuring the resistivity of Copper wire is due to the properties of copper as a material.Copper naturally has a low resistance due to it being a superconductor, meaning that it only has a resistance of minute amounts. As it has this property, it is important to use a copper wire specimen that is long enough and thin enough to have an appreciable resistance. The normal value for the resistivity of copper is about 10-8? m. A 1m length of copper wire with a cross sectional area of 1mm? (10-6m? ) can be predicted to have a resist ance of 0. 01?. This can be calculated by using the resistance formula of: R=? lA? 10-8 ? m x 1m10-6m2=10-2? The wire I will use is going to be thinner than this and will vary in length from 0. -1. 0 metres with a difference of 0. 2m from the previous wire specimen. In total I will have 5 different lengths. Apparatus: * Voltmeter- Accuracy stated as (à ± 0. 5% Read. + 1dgt) in the user manual * Ammeter- Accuracy stated as (à ± 1. 2% Read. + 1dgt) in the user manual * Battery Supply of 6V * Copper Wire * 1m Ruler in cm * Scissors * Electrical Wires * Crocodile clips * Micrometer Method: The following procedure described below is how I intend to gain my results: 1. I will measure out the different lengths of copper wire I intend to use using a millimetre ruler to gain the most accurate results I can. 2. Once he lengths are cut, the diameter of the copper wire I am using must be measured. To gain the most accurate result, I will use a micrometer and measure the diameter in several pl aces on the wire and take an average value from these readings to work out the average cross sectional area. 3. I will connect the first length of wire into an electrical circuit, making sure that current can flow through the entire length of the copper wire connected. The circuit will look like this diagram: V V A A 4. The voltage will be recorded across the wire and the current running through it. 5. To find the resistance of the wire I will use the formula V=IR. . The resistivity can then be worked out using the formula: ? =RAL where R is the resistance calculated, A is the cross sectional area of the copper wire calculated and L is the length of the copper wire. The measurements shall be recorded in the following table shown below: Resistivity of Wire The physical properties of a wire can either be categorised as being an intrinsic property or an extrinsic property. The difference between the two categories of properties is that intrinsic properties do not depend on the amount o f material that is present, whereas extrinsic properties do depend on the amount of material that is present.In the following investigation of the resistivity of copper wire, one could say that the value of the voltage, resistance and current are all intrinsic properties of the copper wire. The extrinsic value of the copper wire would be its resistivity. The resistivity of the copper wire will be dependent on the material itself, which is copper. The resistivity of a material can be defined as the resistance of a 1m length with 1m? cross-sectional area. As the resistivity of material depends mainly on the properties of the material itself, each material whether it is copper or pure silicon has its own resistivity coefficient.The coefficient for copper is 1. 72 ? 10-8? m. This value may seem very small for resistivity, but if one were to know that copper is classed as a superconductor meaning that it conducts electricity extremely well, they would know that in order for the conductan ce to be very high, the resistivity must be very low. This can also be explained by the fact that resistivity is the inverse of conductivity (? =1? ). The potential difference across the copper wire (measured in volts) and the flow of charge (the current) through the copper wire are related through the resistance of the copper wire, not its resistivity.In order to find the resistivity, one needs to work out the resistance first by using the equation R=VI , and then from this they can use the formula ? =RAL to find the resistance. The ââ¬Å"Aâ⬠represents the cross-sectional area of the wire that will be used in the experiment. The resistance of the wire is expected to double in value when the length of the wire doubles in size. The resistivity however, should stay near enough the same throughout all of the repeats conducted. Reducing the uncertainty in the resultsThere are some factors which could affect the accuracy of my results in the experiment of the resistivity of copper wire. One of the factors which could affect the accuracy of my results is to do with the measuring devices I use to conduct the experiment. Any measuring device can only be used to measure to a certain degree of accuracy. It is this certain degree which determines how accurate your results are to the true value. In my experiment, I am using a 3? Digits Multifunction Multimeter (DMM) to measure the current through the circuit and the potential difference (p. d. ) across the copper wire.The main advantage of using a DMM compared to using an analogue voltmeter is the fact that they allow you to record a value to a certain number of decimal places by having different ranges which correspond to the level of precision of the reading. In the experiment I am conducting, I will be measuring the p. d. to a resolution of 0. 001V using the 2V range on the multimeter. Having the resolution to this degree of measurement ensures that I get a voltage reading to 3 decimal places increasing the accu racy of the reading and allowing me to obtain a closer value to the true value.The accuracy for the ammeter has been published as being à ±1. 2% of the reading + 1 LSD for the range (200mA) and resolution (0. 1mA) I will be using for the current. This means that the value I will record will be 1. 2% of the true value of the current +0. 1mA. I am using the 200mA range rather than the 20A range because the resolution of the result is greater than that of the 20A range. This will record a more accurate result which reduces the uncertainty in my results. Similarly the range I will use on the voltmeter which is at 2V has an accuracy of à ±0. 5% of the reading + 1 LSD, which is even more accurate.Another factor which can affect the resistivity of the result is the temperature of the copper wire. This can affect the resistivity by changing the value of the resistance to make the resistance less proportional to that of the length of wire. Normally the resistance of a wire will increase as the length of the wire increases due to their being more atoms in the wire for the electrons to pass by in order to get the through the entire length of wire. As the increase in resistance ? increase in length, the resistance should double when the length of the copper wire is doubled.In order to try and make sure the resistance is not affected by temperature, I will connect the copper wire up into the circuit at a low voltage so that the copper wire will not warm up and increase in resistance due to the atoms inside vibrating more. I will also be using a micrometer to measure the diameter of the wire. I am using a micrometer instead of a standard cm ruler because the level of uncertainty is far less than that of a ruler. The micrometer allows me to record a value for the diameter of the wire with an uncertainty of à ±0. 0005mm, whereas with an ordinary ruler with mm markings, the uncertainty would be à ±0. 1mm. Results:These are the results I collected from the experiment carrie d out. All of the data is raw data that I have collected myself and has not been manipulated in way at all. N. B- The diameter of the wire was measured to be 0. 435mm. The cross sectional area was calculated as being 1. 48? 10-7m2. This value was used throughout the experiment to work out the different resistivity values using the resistivity equation as stated previously. Repeat| Length of Wire (m)| Voltage (V)| Current (A)| Resistance (? )| Resistivity (? m)| 1| 0. 2| 0. 044| 1. 911| 0. 023| 1. 71E-08| 2| 0. 2| 0. 042| 1. 907| 0. 022| 1. 64E-08| 3| 0. 2| 0. 043| 1. 909| 0. 23| 1. 67E-08| 1| 0. 4| 0. 088| 1. 882| 0. 047| 1. 74E-08| 2| 0. 4| 0. 085| 1. 879| 0. 045| 1. 68E-08| 3| 0. 4| 0. 087| 1. 869| 0. 047| 1. 73E-08| 1| 0. 6| 0. 132| 1. 839| 0. 072| 1. 78E-08| 2| 0. 6| 0. 135| 1. 845| 0. 073| 1. 81E-08| 3| 0. 6| 0. 129| 1. 839| 0. 070| 1. 74E-08| 1| 0. 8| 0. 158| 1. 748| 0. 090| 1. 68E-08| 2| 0. 8| 0. 163| 1. 741| 0. 094| 1. 74E-08| 3| 0. 8| 0. 159| 1. 745| 0. 091| 1. 69E-08| 1| 1 . 0| 0. 207| 1. 739| 0. 119| 1. 77E-08| 2| 1. 0| 0. 209| 1. 738| 0. 120| 1. 79E-08| 3| 1. 0| 0. 201| 1. 710| 0. 118| 1. 75E-08| From the table above, I also worked out the averages of the results measured from the experiment.Repeat| Length of Wire (m)| Voltage (V)| Average V| Current (I)| Average I| Resistance (? )| Average R| Resistivity (? m)| 1| 0. 2| 0. 044| 0. 043| 1. 911| 1. 909| 0. 023| 0. 023| 1. 71E-08| 2| 0. 2| 0. 042| | 1. 907| | 0. 022| | 1. 64E-08| 3| 0. 2| 0. 043| | 1. 909| | 0. 023| | 1. 67E-08| 1| 0. 4| 0. 088| 0. 087| 1. 882| 1. 877| 0. 047| 0. 046| 1. 74E-08| 2| 0. 4| 0. 085| | 1. 879| | 0. 045| | 1. 68E-08| 3| 0. 4| 0. 087| | 1. 869| | 0. 047| | 1. 73E-08| 1| 0. 6| 0. 132| 0. 132| 1. 839| 1. 841| 0. 072| 0. 072| 1. 78E-08| 2| 0. 6| 0. 135| | 1. 845| | 0. 073| | 1. 81E-08| 3| 0. 6| 0. 129| | 1. 839| | 0. 70| | 1. 74E-08| 1| 0. 8| 0. 158| 0. 160| 1. 748| 1. 745| 0. 090| 0. 092| 1. 68E-08| 2| 0. 8| 0. 163| | 1. 741| | 0. 094| | 1. 74E-08| 3| 0. 8| 0. 159| | 1. 745| | 0. 091| | 1. 69E-08| 1| 1. 0| 0. 207| 0. 206| 1. 739| 1. 729| 0. 119| 0. 119| 1. 77E-08| 2| 1. 0| 0. 209| | 1. 738| | 0. 120| | 1. 79E-08| 3| 1. 0| 0. 201| | 1. 710| | 0. 118| | 1. 75E-08| Uncertainties within my results: Before creating the graph of my results, I calculated the overall uncertainties of each measurement within this experiment, so that I could see where the most uncertainty of the average resistivity value comes from.To calculate the uncertainty for each measurement, I took the average measurement that had the biggest difference from its original data. The Percentage of uncertainties of each measurement was as follows: * Percentage uncertainty of the Voltage V= 0. 206à ±0. 005 V Uncertainty in V= 0. 0050. 206? 100%? à ±2. 43% * Percentage uncertainty of the Current I=1. 729à ±0. 019 A Uncertainty in I=0. 0191. 729? 100%? à ±1. 10% * Percentage of Uncertainty in Resistance R=V/I Uncertainty of R=1. 10%+2. 43%? à ±3. 53% * Percentage of Uncertainty in Length Unce rtainty=0. 6à ±0. 001m Uncertainty in L=0. 0010. 6? 100%? à ±0. 17% Percentage of Uncertainty in Area: The Diameter of the wire is 0. 435à ±0. 0005mm The best area where the diameter is 0. 435mm A=? 0. 21752? 0. 1486mm2? 1. 486? 10-7m2 The Maximum area where the diameter is ? 0. 4355mm A=? 0. 217752? 0. 1489mm2? 1. 489? 10-7m2 The Minimum area where the diameter is ? 0. 4345mm A=? 0. 217252? 0. 1482mm2? 1. 482? 10-7m2 So the area is 0. 148à ±0. 0004mm2 with a percentage uncertainty of: A=0. 00040. 148? 100%? à ±0. 27% * So the percentage uncertainty in the Resistivity can be calculated as the sum of all the uncertainties in the experiment: ? =RAL=3. 53%+0. 27%+0. 17%=à ±3. 97%The percentages of instrument error are as follows: * Voltmeter reading is à ±0. 0005V Instrumental error in Voltmeter= 0. 00050. 206? 100? 0. 24% * Ammeter reading is à ±0. 0005A Instrumental error in Ammeter=0. 00051. 729? 100? 0. 03% * Micrometer reading is à ±0. 0005mm Instrumental error in Mircome ter=0. 00050. 435? 100? 0. 11% * The total instrumental error is the total of each instrumental error stated above which would be 0. 38%. Graph 1: Graph 2: Data Analysis: In all of my results that I have collected, there is a strong relationship between the increasing length of wire and the value for the resistance.One would expect this strong correlation between the resistance and the length since one of the simple laws of electrical resistance is that it increases proportionally with the increase in the length of the wire. One can explain this through the understanding of electrons in a circuit and the atoms arranged within the components in a circuit. With my experiment of copper wire, a current passed through my circuit once a voltage was applied to the circuit. When the electrons were given energy to move they passed through the circuit to the copper wire where they experienced the resistance which was calculated.As the lengths of the copper wire increase, the amount of fixed a toms within the structure of the wire increases. Due to this the electrons have a higher chance of colliding with the fixed atoms, which causes the wire to heat up and increase the resistance. One can see the certainty in the correlation between the average resistance and the length of the copper wire by looking at the gradient of the line of best fit within graph 1. The gradient shows that R? =0. 9984, showing an extremely strong positive correlation between the two variables.From the equation of the gradient displayed in graph 1, the average resistivity can be calculated which takes into account all of the points within the data collected. The gradient of the line shows the equation Resistance (R)Length (L). In the calculation for resistivity, one not only needs the value of RL, but also needs the cross sectional area of the wire. If the cross sectional area of the wire is multiplied by the gradient, then the average resistivity can be calculated: ? =RAL=0. 1192? 1. 486? 10-7m2? 1 . 77? 10-8? m In Graph 2, the percentage of uncertainty of each average resistance was displayed in the vertical error bars.The percentage of uncertainty of the length of the wire was so small that it was not worth adding to the graph since it is extremely hard to see on the graph. From these percentage uncertainties of the average resistance in the experiment, one can calculate the maximum and the minimum values for the resistivity from looking at the gradients like we did for graph 1. To calculate the minimum gradient, I took the gradient of the line from the maximum uncertainty in the lowest resistance to the minimum uncertainty of the highest resistance.I did this to obtain the shallowest gradient possible from all the points on the graph. I then multiplied this gradient by the smallest area value. lowest ? =0. 1144? 1. 482? 10-7m2? 1. 70? 10-8? m For the maximum value of resistivity, I took the value of the gradient of the line from the minimum uncertainty in the lowest resista nce to the maximum uncertainty of the highest resistance. I did this to obtain the steepest gradient possible from all of the points on the graph. I then multiplied this by the maximum area. maximum ? =0. 1263? (1. 489? 10-7m2)? 1. 88? 10-8? mAfter looking at the average, minimum and maximum values of the resistivity taking into account all of the uncertainties within the calculation one could say that from the investigation conducted, the resistivity of copper wire is 1. 76? 10-8à ±1. 2? 10-9. The percentage uncertainty of the resistivity would then be: 1. 2? 10-91. 76? 10-8? 100%? 6. 8% Biggest Source of Uncertainty From looking at all of the percentage uncertainties for all my measurements, the resistance produced the most uncertainty. The uncertainty of resistance was worked out by adding up the uncertainty of the voltage and the current measured.It must have been from these two calculations where the uncertainty of the resistance became noticed. From calculating the instrument al errors of the multimeter used as a voltmeter and an ammeter, I would not conclude that the vast majority of the error came from the accuracy of the apparatus. I would say that the average resistance I calculated was from the average current which had the biggest difference from its original data, and the average voltage which had the biggest difference from its original data. The average data I had chosen was 0. 206à ±0. 05V and the average data I had chosen for current was 1. 729à ±0. 019A, as they had the biggest uncertainties. Due to this fact I would have produced an uncertainty which had the biggest difference from the original value, so the maximum possible uncertainty for the resistance. Anomalies and Systematic Errors I did not have any anomalous results when looking at the average resistance graph. All of the points plotted show strong correlation with the increase in length. Systematic errors may have contributed to some of my resistivity values being higher or lower than my overall average.An example of this could have been when measuring the diameter of the copper wire. The micrometer did not let me know if both of the sides of the copper wire were touching the micrometer measuring device sufficiently enough or whether or not it was touching both sides of the copper wire more than enough, which would then mean it squashed the diameter of the wire resulting in a lower diameter at certain points across the wire, since I took 3 readings and averaged them out. If this was the case, then one of my wires may have had a higher resistance than the others.One other systematic error may have come from the battery pack. It may have had a temporary glitch in which less electrical energy was sent through the circuit meaning less current was flowing through the circuit, resulting in a larger resistance than that of the previous recording with the same length of wire. This would also alter the final value of the resistivity. Another uncertainty which would b e counted as human error could have been the position at which I had placed the crocodile clips at either end of the copper wire.For the same length of wire, the crocodile clip may have been placed further away from the end of the copper wire than the previous measurement, meaning that the length of the wire would have decreased marginally which may have resulted in a lower resistance recording. Also, when I measured the length of the copper wire, I had to straighten out the length of the wire since it was coiled. When doing this I may have accidently pulled the length of the wire increasing its length by a fractional amount.Having said this, it may have altered the resistance measured in the wire making it larger than it should have been since the electrons have to travel a longer distance. Evaluation After looking at all of my results, I believe that the method I used and the ways of reducing the uncertainty in my experiment were effective. The instrumental errors were minimal and the overall uncertainty of my final calculation of resistivity was a low value. The resistivity value itself did alter but mainly stayed constant throughout the experiment.As I have said, I do not believe this was because of the accuracy of the multimeters I used but due to other factors such as changes in the environment like temperature, or due to systematic errors to do with the battery pack I used. To decrease the uncertainty in my resistance measured, I could use an even lower resolution on my voltmeter (0. 1mV) and ammeter (0. 001mA) to reduce the negative effect of Least Significant Digits (LSD) and to give the most accurate result.This way I could then increase the precision of my results and record a value which is closer to the true value When comparing my average value of resistivity with the published value of resistivity which is 1. 72? 10-8? m, my average value is very close to the published value which shows the level of accuracy throughout my experiment considering the more precise tools that were used by the professionals to gain the published value. The repeats I did helped me to record a value for the resistivity that was close to the published value by reducing the random uncertainty in my results.To gain even more accuracy I could do more repeats, or I could alter the intervals between each length to 0. 1m to increase my range of data. That way I will reduce even more random error within my data. I could also change the different diameters of the wire or change the material I use to compare these results with those and see how they differ. One other change I could do next time is to use an Alternating Current (AC) rather than a Direct Current (DC), since AC is more conventional in houses so it would have provided further information as to how good copper is in the use of houses.
Friday, August 16, 2019
Awareness of safety aspects Essay
Safety aspects, in relation to environment and equipment, include checking the area you are about to do your activity in, i.e. if youââ¬â¢re are going to play football, check there is no dangerous items such as large stones or glass on the pitch and to also check the equipment you are going to use to do your activity, to make sure it is all safe and provides proper protection, for example if you going to play football, check your football and goal posts if they are all in good condition, and ware adequate protection, for the game such as shin pads. We need to warm up for several reasons. One is to prepare mentally for the exercise we are about to do and to get our minds in the correct state to carry out the necessary physical exercises. The other is to warm up physically, to stretch the muscles so they are not all tensed up when we go to do physical activity. This makes our bodies a lot more flexible and a lot more prepared for a game situation. It is necessary to warm up the different muscle groups. For example, warming up your biceps and triceps by reaching for your toes and also warming up your hamstrings by doing squat thrusts to warm up your muscles. You should aim to warm up different muscles at different intervals, so as not to warm up your upper-body muscles all in one go whilst leaving out your lower-body muscles. First, for my warm up we will jog around the gym doing around 5 laps and while jogging around the gym I will be shouting out things i.e. left hand down, right hand down, get down and do 10 press ups and so on. After we have stretched off properly I will play a game called bull dog this game is really easy to play and enjoyable as well so how you play is two people (bull dogs) have to stand in the centre of the gym and shout out one of the persons name and what the person does is shouts out proper loud bull dogs so every one has to go from one end of the gym to the other without getting caught and if you do get court your a bull dog as well so this means that the last man standing wins. This game is good for warming you up because it includes a lot of running in the game. There are three phases to a warm up and they areà Pulse raiser: The aim of the pulse raiser is to elevate the heart rate and respiratory rate by doing light physical activity. This increases the blood flow and helps with the transportation of oxygen and nutrients to the working muscles. This also helps to increase the muscle temperature, allowing for a more effective static stretch. Stretches: Stretching is one of the most critical parts of the Warm Up and of my performance. A more flexible muscle is a stronger and healthier muscle. A stronger and healthier muscle responds better to exercise and activities and helps prevent athlete injury. Before sprinting I stretch for up to 7-12minutes.Bend both knees and put the soles of your feet on the floor to begin.à Leaving one leg bent, straighten the other leg and hold either, behind the thigh or if you are flexible behind the calf. Ensure the flats of your feet remain in contact with the floor at all timesà For that additional stretch gently push the flat of the foot out in front of you into the floor.à Hold this stretch for 15 ââ¬â 30 seconds and repeat on the opposite side. Gluteus Stretch Performed in a supine position. Lie flat out and bend your knees, placing the sole of your feet on the floor. Take leg (a) and place one foot on the knee of the opposite leg (b). Reach through the gap and around the outside of the leg (b), which is bent and on the floor, pull the leg in as far as, is comfortable. Feel the stretch in the buttocks of legà Hold this stretch for 15 ââ¬â 30 secondsà Gluteal stretchà Sit upright with your legs stretched out in front of you. Bend one leg (a) and place it over the top of the straight leg (b). Put the sole of the foot of leg (a) on the floor and hug the knee towards the chest. Feel the stretch in the buttocks on the side of leg. Hold this stretch for 15 ââ¬â 30 seconds. A quadriceps stretch- flat on the floorà Lie face down, with your body in a straight line. Bend one leg aiming to put your heel on your buttocks.à Take hold of the ankle and relax in this position. To increase the stretches push your hips into the floorà Hold this stretch for 15 ââ¬â 30 secondsà quadriceps stretch performed in a standing positionà Ensure your supporting leg is slightly bent and use a wall for support if necessary. Bend your knee and take hold of the ankle of the leg, gently pull the ankle towards your buttocks. Keep your knees together and your head in line with your spine whilst performing this exercise.
Thursday, August 15, 2019
The Jones Family, Incorporated
THE JONES FAMILY, INCORPORATED Principles of Corporate Finance 6th Edition Richard A. Brealey and Stewart C. Myers The accompanying table summarizes Johnny's NPV calculation. He assumed Marsha would take 25 100-mile trips per year, saving $200, plus $1. 00 per mile, plus a $40 tip on every trip. Operating costs would be $. 45 per mile. The net savings are $295 per trip and $7375 per year.These savings increase with inflation at an assumed rate of 4% per year. It seems that Marsha's horse transporter was a good buy after all: NPV is positive (+ $14,325). MINICASE SOLUTIONS THE JONES FAMILY'S HORSE TRANSPORTER |Year |0 |1 |2 |3 |4 |5 |6 |7 |8 | |1.Investment (plus ending value in | | | | | | | | | | |year 8) |-35,000 | | | | | | | |+15,000 | |2. Insurancea |-1,200 |-1,200 |-1,200 |-1,200 |-1,200 |-1,200 |-1,200 |-1,200 | | |3.Net savings vs. rented | | | | | | | | | | |transporterb | |+7,375 |+7,375 |+7,375 |+7,375 |+7,375 |+7,375 |+7,375 |+7,375 | | | | | | | | | | | | |4.Cash flow |- 36,200 |+6,175 |+6,175 |+6,175 |+6,175 |+6,175 |+6,175 |+6,175 |+21,175 | |5. Adjusted for 4% inflationc | | | | | | | | | | | |-36,200 |+6,422 |+6,679 |+6,946 |+7,224 |+7,513 |+7,813 |+8,126 |+28,979 | |6.Present valued |-36,200 |+5,892 |+5,622 |+5,364 |+5,118 |+4,883 |+4,658 |+4,445 |+14,543 | NPV = + 14,325 a Paid at start of year. b Savings per 100-mile trip: 200 + 100 (1. 00 ââ¬â . 45) + 40 = $295. For 25 trips per year, annual savings are 295 x 25 = $7375. Here the savings are entered at end of year (or start of the next year). This understates their value: the Jones family would actually begin to save right away. c Savings increase by 4% per year. Year 8 cash inflows from line 4 are multiplied by (1. 04)8. d Line 5 discounted at 9%.
Subscribe to:
Posts (Atom)